Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T16:31:22.644Z Has data issue: false hasContentIssue false

Principal Residual Strains as A function of Depth for Sputter Deposited Mo Thin Films

Published online by Cambridge University Press:  21 February 2011

S. G. Malhotra
Affiliation:
University of Michigan, Department of Materials Science and Eng., Ann Arbor, MI 48109-2136
Z. U. Rek
Affiliation:
Stanford Synchrotron Radiation Laboratory, Stanford, CA 94305
L. J. Parfitt
Affiliation:
University of Michigan, Department of Materials Science and Eng., Ann Arbor, MI 48109-2136
S. M. Yalisove
Affiliation:
University of Michigan, Department of Materials Science and Eng., Ann Arbor, MI 48109-2136
J. C. Bilello
Affiliation:
University of Michigan, Department of Materials Science and Eng., Ann Arbor, MI 48109-2136
Get access

Abstract

Traditionally, the magnitude of the stress in a thin film is obtained by measuring the curvature of the film-substrate couple; however, these techniques all measure the average stress throughout the film thickness. On a microscopic level, the details of the strain distribution as a function of depth through the thickness of the film can have important consequences in governing film quality and ultimate morphology. A new method for determining the magnitude of principal strains (strain eigenvalues) as a function of x-ray penetration depth using grazing incidence x-ray scattering for a polycrystalline thin film will be described. Results are reported for two Mo metallizations ˜ 500 Å and ˜1000 Å thick sputtered onto Si {100} substrates. The magnitude of the principal strains at several penetration depths was accomplished by an analysis of the diffraction peak shifts of at least six independent {hkl} scattering vectors from the Mo thin films. An out-of-plane strain gradient was identified in both Mo films and the strain eigenvalues were found to be anisotropic in nature. This new methodology should work with a variety of thin films and hence would provide quantitative insight into the evolution of thin film microstructure.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable