Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T10:40:12.699Z Has data issue: false hasContentIssue false

Printable Electronics: Patterning of Conductive Materials for Novel Applications

Published online by Cambridge University Press:  01 February 2011

Anupama Karwa
Affiliation:
Center for Materials Science and Engineering, Rochester Institute of Technology, Rochester, NY, 14623
Yu Xia
Affiliation:
Center for Materials Science and Engineering, Rochester Institute of Technology, Rochester, NY, 14623
Daniel M. Clark
Affiliation:
Printing Applications Lab, Rochester Institute of Technology, Rochester, NY, 14623
Thomas W. Smith
Affiliation:
Center for Materials Science and Engineering, Rochester Institute of Technology, Rochester, NY, 14623
Bruce E. Kahn
Affiliation:
Imaging and Photographic Technology, Rochester Institute of Technology, Rochester, NY, 14623Center for Materials Science and Engineering, Rochester Institute of Technology, Rochester, NY, 14623
Get access

Abstract

The convergence of materials science, printing, and electronics promises to offer low cost and high volume production of devices such as transistors, RFID tags, wearable electronics and other novel applications. Although a number of “soft lithographic” techniques have been used to make these devices, they are slow and have a limited production volume [5], [14-15].

Here high volume printing processes like rotary letterpress, flexography and offset lithography have been investigated for patterning conductive materials [1]. The synthesis and development of conducting inks using electrically functional polymers has been studied. The feasibility of using such inks in high volume printing processes has been studied. An attempt has been made to print conductive interdigitated electrodes using these inks to obtain uniform coating properties and appropriate electrical characteristics. Various process parameters like type of substrate, inking time and speed, printing pressure, printing force and ink formulation have been investigated.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable