Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T17:38:36.999Z Has data issue: false hasContentIssue false

Processing and Characterization of CVD c-BN Films and c-BN/Diamond Bilayers

Published online by Cambridge University Press:  11 February 2011

Tien-Syh Yang
Affiliation:
Department of Materials Science and Engineering, National Dong Hwa University, Taiwan, ROC.
Jong-Bin Cheng
Affiliation:
Department of Materials Science and Engineering, National Dong Hwa University, Taiwan, ROC.
Ming-Show Wong
Affiliation:
Department of Materials Science and Engineering, National Dong Hwa University, Taiwan, ROC.
Get access

Abstract

The paper reports the syntheses of c-BN films by the reaction of B2H6 and NH3 in the hydrogen and argon mixture using microwave plasma-assisted chemical vapor deposition (MPCVD). The effects of NH3/B2H6 ratios, hydrogen addition, pulsed-DC substrate-bias voltage and diamond as bufferlayer on the formation of c-BN were investigated. As-grown films are characterized by FTIR, grazing-incidence XRD, and SEM. The NH3/ B2H6 = 3 was selected to obtain a better crystallized BN films with moderate deposition rate. When the hydrogen content was at 85 vol.% in the gas mixture and the substrate bias at −200 V, the maximum c-BN content about 65 % was obtained. However, the film was easily cracked in a few hours. The film deposited at lower substrate biasing of −100 V could preserve for a few days without peeling off, although it had lower c-BN content about 40 %. Nanocrystalline diamond film, deposited from 1 vol.% CH4/Ar plasma, as bufferlayer can promote the heteroepitaxial growth of c-BN, resulting in 80 % c-BN content. The c-BN/diamond bilayer were adherent with a total thickness of 1.2 μm.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable