Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T11:32:22.271Z Has data issue: false hasContentIssue false

Processing and Performance of V205 Xerogel, Aerogel, and Aerogellike Materials as Lithium Intercalation Hosts

Published online by Cambridge University Press:  10 February 2011

Leland H. Manhart
Affiliation:
Corrosion Research Center, Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455
Jun John Xu
Affiliation:
Corrosion Research Center, Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455
Fabrice Coustier
Affiliation:
Corrosion Research Center, Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455
Stefano Passerini
Affiliation:
Corrosion Research Center, Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455
Boone B. Owens
Affiliation:
Corrosion Research Center, Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455
William H. Smyrl
Affiliation:
Corrosion Research Center, Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455
Get access

Abstract

Various forms of vanadium pentoxide, including xerogel, aerogel, and aerogel-like forms, were prepared by sol-gel synthesis and processed by novel procedures following synthesis. It was demonstrated that the intrinsic thermodynamics of lithium intercalation of the ARG and ARG-like materials prepared by solvent exchange processes involving methyl formate (MF/ARG and MF/ARG-xslike) are identical, while they are drastically different from those of the parent XRG, which gives rise to significantly increased specific energies for the MF/ARG or MF/ARG-like as lithium intercalation hosts. All three forms are capable of reversibly intercalating up to four moles of Li+ ions per mole of V205 electrochemically and can be cathode candidates for rechargeable lithium batteries. Various processing methods for fabricating composite electrodes with the XRG led to specific capacity in the range of 300 to 350 mAh/g at C4Li/ 20 rate, and good cyclability.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable