Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T15:28:33.410Z Has data issue: false hasContentIssue false

Processing and Properties of Sol-Gel Derived 20 Mol% Na2 0–80 Mol% SiO2 (20N) Materials

Published online by Cambridge University Press:  15 February 2011

S. H. Wang
Affiliation:
Materials Science and Engineering, University of Florida Gainesville, Florida, 32611, USA
L. L. Hench
Affiliation:
Materials Science and Engineering, University of Florida Gainesville, Florida, 32611, USA
Get access

Extract

A number of investigators [1–6] have studied the sol-gel-glass transformation and the aging, drying and densification processes involved. However, monolithic, amorphous, large scale xerogels are still difficult to produce because of insufficient understanding of basic changes in microstructure during the sol-gel-glass transformation and the chemical reactions of the precursors, solvents and catalysts used. Some papers sugqest ways of obtaining monolithic gels by (1) increasing the mechanical strength of gel by aging [7]; (2) diminishing the magnitude of capillary forces by enlarging the pore size and/or decreasing the surface energy by using surfactants [8] (3) reducino the rate of evaporation of the solvent from the pores by using a semipermeable membrane during drying [9] (4); and eliminating the pore liquid-solid interface by hypercritical evacuation [10].

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable