Published online by Cambridge University Press: 25 February 2011
Shallow p+n junctions have been formed through a combination ofpre-amorphization of the silicon surface by implantation of 28Si, 33Ar, or 73Ge, low energy implantation of boron or BF2+, and rapid thermal annealing (RTA) in a tunqsten halogen lampsystem. Both pre-amorphization and RTA are required to form a shallow(<0.25 μm) junction, for either boron or BF2+. Arqon pre-amorphization results in poor electrical activationof the boron, while germanium gives the lowest sheet resistivity, but isresponsible for a deep boron tail during implantation. The residual damageis characterized by a plane of dislocation loops centred either close to theboron concentration peak, for B+ implantation into a crystallinesubstrate, or at the original amorphous-crystalline interface, forpre-amorphized specimens.