Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T04:48:22.943Z Has data issue: false hasContentIssue false

Rational Design of Highly Filled Reactive Resins for Electronic Material Applications with Multiple Performance Constraints

Published online by Cambridge University Press:  26 February 2011

Daniel J Duffy
Affiliation:
daniel.duffy@nstarch.com, National Starch & Chemical Company, Corporate Research, 10 Finderne Ave., Bridgewater, NJ, 08807, United States, (908) 685-5267, (908) 685-7400
Allison Xiao
Affiliation:
allison.xiao@nstarch.com, National Starch & Chemical Company, 10 Finderne Ave., Bridgewater, NJ, 08807, United States
Get access

Abstract

Cyanate ester resin and its blends with epoxy resin demonstrate a lower viscosity build up when filled with thermally treated silica fillers than with untreated silica fillers. The reduced viscosity build up resulting from the use of the thermally treated materials results in faster capillary flow rates by a factor of 2 to 5 with respect to untreated silica particles. Surface properties of the filler materials are used to interpret the viscosity and flow rate data and guide design of filler surface properties. The flow rate performance improvement contributes to design of new capillary underfill materials for electronic materials applications.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable