Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T02:53:32.449Z Has data issue: false hasContentIssue false

Reactive Ion Etching of Copper with SiCl4 and CCl2F2

Published online by Cambridge University Press:  26 February 2011

B. J. Howard
Affiliation:
Center for Integrated Electronics Rensselaer Polytechnic Institute, Troy, New York 12180–3590
S. K. Wolterman
Affiliation:
Center for Integrated Electronics Rensselaer Polytechnic Institute, Troy, New York 12180–3590
W. J. Yoo
Affiliation:
Center for Integrated Electronics Rensselaer Polytechnic Institute, Troy, New York 12180–3590
B. Gittleman
Affiliation:
Center for Integrated Electronics Rensselaer Polytechnic Institute, Troy, New York 12180–3590
CH. SteinbrÜchel
Affiliation:
Center for Integrated Electronics Rensselaer Polytechnic Institute, Troy, New York 12180–3590
Get access

Abstract

Copper may become an alternative to aluminum as an interconnect material in future multilevel metallization schemes if it is possible to pattern Cu by dry etching in a manufacturable process. Here we report results on the reactive ion etching of Cu in SiCl4 /Ar, SiCl4/N2, and CCl2F2/Ar plasmas. Etch rates have been investigated as a function of various plasma parameters, such as gas composition, pressure, etc., and substrate temperature. We have obtained etch rates as high as 850 Å /min with SiCl4/N2 and a substrate temperature of ∼ 200 ° C. Also, it appears feasible to pattern Cu anisotropically using either polyimide or amorphous carbon as a high-temperature etch mask.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable