Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T16:01:24.601Z Has data issue: false hasContentIssue false

Relation Between Strength, Pore Structure and Associated Properties of Slag-Containing Cementitious Materials

Published online by Cambridge University Press:  22 February 2011

Della M. Roy
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
G. M. Idorn
Affiliation:
Tovesvej, Naerum, Denmark
Get access

Abstract

Substantial increases of the strength of cement paste and mortars may be obtained in conventional processing by optimizing the materials components, the rheology and the curing, and thereby improving the microstructures. Cementitious materials with high proportions of granulated blast-furnace slag have been investigated. Higher strengths of ASTM C 109 mortars were obtained with 40 to 65% substitution of portland cement by slag, than with ordinary mix compositions and processing.

For one set of mixtures, 28 day strengths ≥ 100 MPa (some as high as 240 MPa) were consistently attained after curing at temperatures ranging from 27 to 250°C. The slag substitutions developed finer pore structures as revealed by intrusion porosimetry measurements, than those with pure portland cement. This is believed to be a major reason for their enhanced durability. At each stage from 3 to 28 days, increase of curing temperatures from 27 to 90°C decreased porosity and increased the strength, reflecting an increased maturity.

Implications for practice and suggestions for further work are discussed.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable