Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T19:51:10.927Z Has data issue: false hasContentIssue false

RRAM electronics and Switching Mechanism

Published online by Cambridge University Press:  01 February 2011

Sheng Teng Hsu
Affiliation:
shsu@sharplabs.com, Sharp Laboratories of America, Department 5, 5700 NW Pacific Rim Blvd, Camas, WA, 98607, United States, (360) 834-8698, (360) 834-8689
TingKai Li
Affiliation:
tli@sharplabs.com, Sharp Laboratories of America, Department 5, 5700 NW Pacific Rim Blvd, Camas, WA, 98607, United States
Get access

Abstract

The property of PCMO RRAM memory devices have been studied in terms of electrical pulse width, Pulse polarity, voltage ramping, film thickness, resistivity distribution, and temperature dependent of resistance. The PCMO material is deposited using MOD, PVD, or PLD process. The experimental results clearly indicated the resistance increase is due to localization of valence electrons. The narrow pulse induced resistance increase near the cathode indicated the localization of valence electrons is the effect of high density of excessive non-equilibrium electrons through the well known Jahn-Teller effect. High density of non-equilibrium electrons may also be induced by any other means such as displacement current, space charge limited current, SCLC, and radiation. High field intensity collapses the localized valence electrons and returns the device to the low resistance state. This is the intrinsic property of transition metal oxides. We expect all doped and un-doped transition metal oxides to exhibit resistance switching property.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable