Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T14:42:28.712Z Has data issue: false hasContentIssue false

Scalable Fabrication and Optical Characterization of Nm Si Structures

Published online by Cambridge University Press:  28 February 2011

Saleem H. Zaidi
Affiliation:
Center For High Technology Materials, University of New Mexico, Albuquerque, NM 87131
An-Shyang Chu
Affiliation:
Center For High Technology Materials, University of New Mexico, Albuquerque, NM 87131
S. R. J. Brueck
Affiliation:
Center For High Technology Materials, University of New Mexico, Albuquerque, NM 87131
Get access

Abstract

Observations of efficient room temperature photoluminescence (PL) from porous Si have generated a great deal of interest in the optical properties of nm-scale Si structures. The stochastic character of porous-Si fabrication results in a distribution of crystal sizes and shapes. We report on a scalable (to large areas) and manufacturable (to high volumes) fabrication technology for uniform, nm-linewidth Si structures providing an important testbed for controlled studies of these optical properties. Large areas ( ∼ 1 cm2) of extreme sub-μm structures (to ∼ 5 nm) are re-producibly fabricated. Both walls (1-D confinement) and wires (2-D confinement) are reported. The fabrication process includes: interferometric lithography, highly anisotropic KOH etching, and structure dependent oxidation. For the walls, nearly perfect <111> crystal planes form the sidewalls and very high width/depth aspect ratios (> 50) have been achieved. Raman scattering results on the walls demonstrate three regimes: 1) lineshapes and cross sections similar to bulk Si for line widths, W > 200 nm; 2) electromagnetic resonance enhancement of the cross section ( to - 100x) for W from 50-200 nm; and 3) highly asymmetric lineshapes and splittings from W < 30 nm. Photoluminescence is observed for the thinnest samples (W < 10 nm) and is as intense as that observed from porous Si with a spectral linewidth ∼ 50 % smaller than that of porous Si.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable