Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T04:49:30.651Z Has data issue: false hasContentIssue false

Selective Laser Sintering of Zirconia

Published online by Cambridge University Press:  10 February 2011

Nicole R. Harlan
Affiliation:
Texas Materials Institute, Department of Mechanical Engineering, The University of Texas at Austin
David Bourell
Affiliation:
Texas Materials Institute, Department of Mechanical Engineering, The University of Texas at Austin
Seok-Min Park
Affiliation:
Texas Materials Institute, Department of Mechanical Engineering, The University of Texas at Austin
Joseph J. Beaman Jr
Affiliation:
Texas Materials Institute, Department of Mechanical Engineering, The University of Texas at Austin
Get access

Abstract

A combination of Selective Laser Sintering and colloidal infiltration has been used to create partially stabilized zirconia molds for titanium casting. The mold material system was chosen for its low reactivity with molten titanium and thermal shock resistance. The base material, stabilized zirconia mixed with a copolymer binder, was pre-processed before laser sintering into the desired green shape. The average density of the fired parts could be increased to twice that of the green density. Hole sizes as small as 180 m are possible in thin ceramic components.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable