Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T07:34:55.055Z Has data issue: false hasContentIssue false

Sequential Lateral Solidification of Ultra-Thin a-Si Films

Published online by Cambridge University Press:  14 March 2011

Hans S. Cho
Affiliation:
Program in Materials Science and Engineering, Department of Applied Physics and Applied Mathematics, School of Engineering and Applied Science, Columbia University, New York, NY
Dongbyum Kim
Affiliation:
Program in Materials Science and Engineering, Department of Applied Physics and Applied Mathematics, School of Engineering and Applied Science, Columbia University, New York, NY
Alexander B. Limanov
Affiliation:
Program in Materials Science and Engineering, Department of Applied Physics and Applied Mathematics, School of Engineering and Applied Science, Columbia University, New York, NY
Mark A. Crowder
Affiliation:
Program in Materials Science and Engineering, Department of Applied Physics and Applied Mathematics, School of Engineering and Applied Science, Columbia University, New York, NY
James S. Im
Affiliation:
Program in Materials Science and Engineering, Department of Applied Physics and Applied Mathematics, School of Engineering and Applied Science, Columbia University, New York, NY
Get access

Abstract

This paper demonstrates that Sequential Lateral Solidification (SLS) of Si can be carried out on films as thin as – and potentially much thinner than – 250 Å. When compared to thicker Si films, however, the SLS-processed ultra-thin films contain more twins, and successful processing requires irradiation within a narrower laser energy density range and a smaller per-pulse translation distance. The physical interpretation of these findings is formulated by analyzing the details of the microstructures observed in single-pulse-irradiation-induced Controlled Super-Lateral Growth (C-SLG) experiments. SEM and TEM analyses reveal complicated microstructural details that we interpret as originating from breakdown of epitaxial growth during lateral solidification, an effect that is detrimental to the SLS process. Based on considerations of far-from- equilibrium solidification behavior of Si, it is argued that undercooling of the solidification interface below a threshold value at which solidification no longer proceeds epitaxially – arising from reduction in interfacial recalescence during lateral solidification of ultra-thin Si films, relative to that of thicker films – is responsible for the breakdown. Based on this model, we discuss how external parameters may be adjusted so as to permit optimal crystallization of ultra-thin Si films using SLS.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable