Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T18:22:07.631Z Has data issue: false hasContentIssue false

Silver antimony sulfide-selenide for thin film solar cells

Published online by Cambridge University Press:  10 September 2014

Jesús Capistrán-Martínez
Affiliation:
Instituto de Energías Renovables, Universidad Nacional Autónoma de México Temixco-62580, Morelos, México
M.T.S Nair
Affiliation:
Instituto de Energías Renovables, Universidad Nacional Autónoma de México Temixco-62580, Morelos, México
P.K. Nair
Affiliation:
Instituto de Energías Renovables, Universidad Nacional Autónoma de México Temixco-62580, Morelos, México
Get access

Abstract

Thin films of AgSbS2 (150 nm) are prepared (75 min at 40 °C) via chemical deposition using a solution mixture containing SbCl3, Na2S2O3 and AgNO3. As-deposited films are amorphous. When they are heated in nitrogen at 180-320 °C, crystalline cubic-AgSbS2 films are formed. They show an optical band gap 1.89 eV and photoconductivity 1.8x10-5 Ω-1cm-1. Silver antimony sulfide-selenide film, AgSb(SxSe1-x)2, is produced from the initial amorphous film when it is heated in presence of Se-vapor. XRD analysis confirms the formation of solid solution AgSbS1.25Se0.75 or AgSbSe2 depending on the extent of Se-vapor available during heating. SnO2:F/CdS/AgSbS2/C solar cell shows V oc 610 mV, J sc 0.88 mA/cm2 ,FF 0.53 and η 0.28%. In SnO2:F/CdS/Sb2S3/AgSb(SxSe1-x)2/C solar cell, V oc is 582 mV, J sc 0.99 mA/cm2, FF 0.51 and η 0.29%.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable