Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T06:07:37.741Z Has data issue: false hasContentIssue false

A Simple Method for Determination of the Elastic Modulus of Thin Films on a Substrate

Published online by Cambridge University Press:  15 February 2011

M.V. Swain
Affiliation:
CSIRO Division of Applied Physics, Lindfield NSW 2070, Australia.
E.R. Weppelmann
Affiliation:
CSIRO Division of Applied Physics, Lindfield NSW 2070, Australia.
Get access

Abstract

High precision force displacement indenting instruments are now widely used for the determination of the mechanical properties of materials. However, for thin films attached to a substrate, the basis of any analysis of such high precision data is still limited. In this study the force displacement data has been generated using spherically tipped indenters of radii from 5 to 150 μm loaded onto a 2.74 μm thick TiN film on a silicon substrate as well as onto the substrate directly. Data have been generated using two loading procedures, continuous and load partial-unloading, almost entirely within the elastic contact regime. The results are analysed to determine the modulus of the TiN film.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable