Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T17:31:33.611Z Has data issue: false hasContentIssue false

Single-Axis Projection Scheme for Conducting Sequential Lateral Solidifica-tion of Si Films for Large-Area Electronics

Published online by Cambridge University Press:  17 March 2011

Alexander Limanov
Affiliation:
Institute of Crystallography Russian Academy of Sciences, Moscow
Vladimir Borisov
Affiliation:
TRINITI, Troitsk, Moscow region
Get access

Abstract

This paper deals with some results of research in SLS performed in the excimer laser laboratory of TRINITI research institute, Russia, where different types of excimer lasers have been developed and manufactured. The research used a new simple SLS approach based on single-axis (i.e., cylinder) projection optics. The method employs a long single melting line extended many centimeters in length. The line is formed by projection through a single slit in a bulk metal mask. Some aspects of the efficiency, potential, and technical challenge of the method are discussed. This method is particularly useful with low pulse energy and high frequency excimer lasers, and one of the most efficient ways of providing directionally crystallized Si films over a large area. Several types of excimer lasers were tested for the SLS technique. It was found that among various parameters, pulse duration is a more important one, e.g., an increase in pulse duration from 25 to 150 ns results in enlargement of lateral growth distance by about three times.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable