Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T09:21:09.008Z Has data issue: false hasContentIssue false

Slip trace characterisation of Ni3Al by atomic force microscopy.

Published online by Cambridge University Press:  21 March 2011

Christophe Coupeau
Affiliation:
Université de Poitiers, LMP, UMR-CNRS 6630, SP2MI, F-86962 Futuroscope Cedex, FRANCE.
Tomas Kruml
Affiliation:
Ecole Polytechnique Fédérale de Lausanne (EPFL), DP-IGA, CH-1015 Lausanne, SWITZERLAND.
Joël Bonneville
Affiliation:
Université de Poitiers, LMP, UMR-CNRS 6630, SP2MI, F-86962 Futuroscope Cedex, FRANCE.
Get access

Abstract

We examined by atomic force microscope the slip traces produced on Ni3Al single crystals pre-deformed up to nearly 1% plastic strain at three temperatures in the anomaly domain: 293K, 500K and 720K. It is observed that, whatever the deformation temperature, the slip traces essentially belong to the primary octahedral slip system. The lengths of the slip lines become shorter and shorter with increasing temperature, while the number of dislocations that constitutes the lines is approximately constant. These results are interpreted in terms of a decreasing mean free path of the mobile dislocations when the temperature is raised. The implications of these results in the understanding of the flow stress anomaly are underscored.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable