Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T10:57:02.563Z Has data issue: false hasContentIssue false

Sol-Gel Derived Barium Sodium Niobate and Bismuth Titanate Films

Published online by Cambridge University Press:  25 February 2011

J.M. Boulton
Affiliation:
Department of Materials Science and Engineering, University of Arizona, Tucson, AZ 85721
G. Teowee
Affiliation:
Department of Materials Science and Engineering, University of Arizona, Tucson, AZ 85721
W.M. Bomnersbach
Affiliation:
Department of Materials Science and Engineering, University of Arizona, Tucson, AZ 85721
D.R. Uhlmann
Affiliation:
Department of Materials Science and Engineering, University of Arizona, Tucson, AZ 85721
Get access

Abstract

Sol-gel derived barium sodium niobate and bismuth titanate films were successfully prepared from precursor solutions of chelated Ba[Nb(OEt)6]2 and NaNb(OEt)6 and from bismuth 2-ethyl hexanoate and Ti(OEt)4 respectively. Single phase Ba2NaNb5O15 was formed at 750C on platinized Si and at 850C on fused SiO2. Monoclinic (pseudo-orthorhombic) Bi4Ti3O12 was formed at temperatures as low as 500C. Both film compositions showed significant second harmonic generation. The dielectric constant of the bismuth titanate film was comparable to that of sputtered films.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable