Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T04:23:26.096Z Has data issue: false hasContentIssue false

Sol-Gel Processing of Optical Fiber

Published online by Cambridge University Press:  25 February 2011

M. E. Elias
Affiliation:
Department of Chemistry, Libson University, F.C. L., R. Escola Politecnica, 1294 Lisbon Codex – Portugal
A. M. Elias
Affiliation:
Department of Chemistry, Libson University, F.C. L., R. Escola Politecnica, 1294 Lisbon Codex – Portugal
Get access

Abstract

A new method for optical fiber production is shown. Hydrolytic polycondensation of tetramethoxysilane using a low concentration of α-picoline, 1.56×10−3% in water, gives SiO2 gel which was dried at 22 °C to a transparent amorphous material.

The densification process shows an exponential time dependence with a final value of 2.253 g/cm3 after 30 days. The specific surface area of the porous gel varies from 500 to 600 m2/g but pores are eliminated by the sintering process. Before sintering the gel, it is treated under an oxidizing atmosphere above 700 °C. At 1200 °C the pores are eliminated and a solid glass rod obtained.

After the sintering process a fiber is obtained from the rod which shows a transmission loss as low as 5.5 dB/km at 840nm.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable