Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T06:41:34.331Z Has data issue: false hasContentIssue false

Solid-Phase Epitaxial Crystallisation of GexSi1-x Alloy Layers

Published online by Cambridge University Press:  22 February 2011

Robert G. Elliman
Affiliation:
Electronic Materials Engineering Department, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200, AUSTRALIA.
Wah-Chung Wong
Affiliation:
Electronic Materials Engineering Department, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200, AUSTRALIA.
Per KringhØj
Affiliation:
Electronic Materials Engineering Department, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200, AUSTRALIA.
Get access

Abstract

Thermally-induced solid-phase epitaxial crystallisation (SPEC) and ion-beam-induced epitaxial crystallisation (IBIEC) of amorphous GexSi1-x alloy layers is examined for three different starting structures: a) strain-relaxed alloy layers of uniform composition, b) strained alloy layers of uniform composition, and c) Ge implanted Si layers. Thermal annealing experiments show that the activation energy for strain-relaxed alloys is higher than that expected from a simple extrapolation between the activation energies of Si and Ge, and exceeds that of Si for x ≤ 0.3. Experiments on thin strained layers show that MBE grown strained layers which are stable during annealing at 1100°C for 60 s are also fully strained after SPEC, whereas layers which relax during annealing at 1100°C also relax during SPEC. Experiments on ion-implanted GeχSiι_x structures show that fully strained Si/GexSi1-x /Si heterostructures can be fabricated for ion fluences below a critical fluence, and as for uniform alloy layers that this critical fluence is accurately predicted by equilibrium theory. Strain relaxation during SPEC of uniform alloys and implanted structures is shown to be correlated with a sudden reduction in crystallisation velocity which is believed to be caused by stress-induced roughening or faceting of the crystalline/amorphous interface. IBIEC of thick (800 nm) implanted layers is shown to be limited by competition from ion-beam induced random crystallisation, while thin (120 nm) uniform alloys and implanted structures are shown to crystallise ephaxially and to exhibit similar behaviour to thermally annealed samples under certain conditions.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable