Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T11:33:18.169Z Has data issue: false hasContentIssue false

Strain Measurements from Single Grains in Passivated Aluminum Conductor Lines by X-Ray Microdiffraction During Electromigration

Published online by Cambridge University Press:  17 March 2011

K. J. Hwang
Affiliation:
Materials Research Center, Lehigh University, Bethlehem, PA 18015, kjh2@lehigh.edu
G. S. Cargill III
Affiliation:
Materials Research Center, Lehigh University, Bethlehem, PA 18015
T. Marieb
Affiliation:
Components Research, Intel Corp., Hillsboro, OR 97124
Get access

Abstract

We describe a method for determining the local strain state of passivated aluminum metal lines from single grains within 2.6 µm × 7.0 µm × 0.75 µm sized regions along the line. X-ray microbeam diffraction is used to obtain localized measurements of thermal and electromigration-induced strain during 37 hours of electromigration in a passivated 2.6 µm-wide, 300 µm-long pure Al conductor line at a current density of 4.2×105 A/cm2 and temperature of 270°C. Diffraction from single grains is used to measure both the in-plane and normal components of strain and their evolution during electromigration at several positions along the line.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable