Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T01:30:07.305Z Has data issue: false hasContentIssue false

Stress Development and Adhesion Behavior in Thin Ceramic Coatings Monitored by Positron Annihilation During Bending

Published online by Cambridge University Press:  21 March 2011

R. Escobar Galindo
Affiliation:
Interfaculty Reactor Institute, Delft University of Technology, Delft, The Netherlands
A. van Veen
Affiliation:
Interfaculty Reactor Institute, Delft University of Technology, Delft, The Netherlands
H. Schut
Affiliation:
Interfaculty Reactor Institute, Delft University of Technology, Delft, The Netherlands
N.J.M. Carvalho
Affiliation:
Materials Science Centre and NIMR, University of Groningen, Groningen, The Netherlands
C. Strondl
Affiliation:
Hauzer Techno Coating, Venlo, The Netherlands.
J. Th. M. de Hosson
Affiliation:
Materials Science Centre and NIMR, University of Groningen, Groningen, The Netherlands
Get access

Abstract

Positron Beam Analysis was for the first time performed in combination with a four-point bending stage. Applications of this novel technique on PVD TiN (5 m thick), WC:H (2.5 m) and CrN (1.5 m m) layers on tool steel, low carbon steel and stainless steel substrates are discussed. It appeared from PBA results that for these systems the coatings did not fail by delamination during bending. SEM confirmed that there was no decohesion but instead, cracking of the coatings was observed. In order to weaken the interface and quantify adhesion properties we propose to induce blistering based on localised gas implantation.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable