Hostname: page-component-7b7567c8c-lpg2g Total loading time: 0 Render date: 2026-11-15T11:39:54.141Z Has data issue: false hasContentIssue false
  • English
  • Français

Structure and mechanical behavior relationship in nano-scaled multilayered materials

Published online by Cambridge University Press:  18 March 2011

A. Sergueeva,
N. Mara and
A.K. Mukherjee
A. Sergueeva
Affiliation:
Department of Chemical Engineering and Materials Science, University of California, Davis, CA 95616, U.S.A.
N. Mara
Affiliation:
Department of Chemical Engineering and Materials Science, University of California, Davis, CA 95616, U.S.A.
A.K. Mukherjee
Affiliation:
Department of Chemical Engineering and Materials Science, University of California, Davis, CA 95616, U.S.A.
Get access

Abstract

Multilayered foils with 10%Cu/90%Ni and different bi-layer thickness (100-1000 nm) have been fabricated by electrodeposition. TEM and x-ray diffraction analysis indicate discrete layer formation and a (100) textured structure. The maximum tensile strength (590 MPa) is obtained for foils with the smallest layer thickness. Preliminary results on high temperature deformation show a strong dependence of strength and plasticity on layer thickness.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Chang, L.L. and Giessen, B.C. (eds.), Synthetic Modulated Structures, Acad.Press, New York, 1986.Google Scholar
2. Suryananayana, C. and Froes, F.H., Metall. Trans. 23A, 1071 (1992).Google Scholar
3. Veprek, S., Reiprich, S., Thin Solid Films 268, 64 (1995).Google Scholar
4. Barnett, S.A. and Shinn, M., in Annu. Rev. Mater. Sci. 24, 481 (1994).Google Scholar
5. Grilhe, J., in Mechanical Properties and deformation behavior of materials having ultra-fine microstructures, (Kluwer Academic Publishers, Boston, MA, 1993) p.255.Google Scholar
6. Amblard, J., Electrochim. Acta 28, 909 (1983).Google Scholar
7. Moffat, T.P., Mater.Res.Soc.Symp.Proc. 451, 413 (1997).Google Scholar
8. Embrahimi, F. and Liscamo, A.J., Mater. Sci. Eng. A301, 23 (2001).Google Scholar
9. Tench, D.M. and White, J.T., J. Electrochem. Soc. 138, 3757 (1991).Google Scholar
10. Menezes, S. and Anderson, D.P., J. Electrochem. Soc. 137, 440 (1990).Google Scholar
11. Krzanowski, J.E., Scripta Metall. Mater. 25, 1465 (1991).Google Scholar