Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T08:35:06.159Z Has data issue: false hasContentIssue false

Structured Carbon Nanotube/Silicon Nanoparticle Anode Architecture for High Performance Lithium-Ion Batteries

Published online by Cambridge University Press:  13 March 2014

Sharon Kotz
Affiliation:
NSF Nanoscale Science and Engineering Center for High-rate Nanomanufacturing (CHN), Northeastern University, Boston, MA, United States
Ankita Shah
Affiliation:
NSF Nanoscale Science and Engineering Center for High-rate Nanomanufacturing (CHN), Northeastern University, Boston, MA, United States
Sivasubramanian Somu
Affiliation:
NSF Nanoscale Science and Engineering Center for High-rate Nanomanufacturing (CHN), Northeastern University, Boston, MA, United States
KM Abraham
Affiliation:
NSF Nanoscale Science and Engineering Center for High-rate Nanomanufacturing (CHN), Northeastern University, Boston, MA, United States
Sanjeev Mukerjee
Affiliation:
NSF Nanoscale Science and Engineering Center for High-rate Nanomanufacturing (CHN), Northeastern University, Boston, MA, United States
Ahmed Busnaina
Affiliation:
NSF Nanoscale Science and Engineering Center for High-rate Nanomanufacturing (CHN), Northeastern University, Boston, MA, United States
Get access

Abstract

Silicon is emerging as a very attractive anode material for lithium ion batteries due to its low discharge potential, natural abundance, and high theoretical capacity of 4200 mAh/g, more than ten times that of graphite (372 mAh/g). This high charge capacity is the result of silicon’s ability to incorporate 4.4 lithium atoms per silicon atom; however, the incorporation of lithium also leads to a 300-400% volume expansion during charging, which can cause pulverization of the material and loss of access to the silicon. The architecture of the anode must therefore be able to adapt to this volume increase. Here we present a layered carbon nanotube and silicon nanoparticle electrode structure, fabricated using directed assembly techniques. The porous carbon nanotube layers maintain electrical connectivity through the active material and increase the surface area of the current collector. Using this architecture, we obtain an initial capacity in excess of 4000 mAh/g, as well as increased power and energy density as compared to anodes fabricated using the standard procedure of slurry casting.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable