Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T17:25:58.239Z Has data issue: false hasContentIssue false

Structure-Property Relationship of Metal-Ceramic Interfaces Produced by Laser Processing

Published online by Cambridge University Press:  21 February 2011

J.Th.M. De Hosson
Affiliation:
Department of Applied Physics, University of Groningen, Zernike Complex, Nijenborgh 4,9747 AG Groningen, The Netherlands
X.B. Zhou
Affiliation:
Department of Applied Physics, University of Groningen, Zernike Complex, Nijenborgh 4,9747 AG Groningen, The Netherlands
M. Van Den Burg
Affiliation:
Department of Applied Physics, University of Groningen, Zernike Complex, Nijenborgh 4,9747 AG Groningen, The Netherlands
Get access

Abstract

A novel process was developed to firmly coat an aluminium alloy, A16061, with α-A12O3 by means of laser processing. In this approach a mixture of SiO2 and Al powder was used to inject in the laser melted surface of aluminium. A reaction product α-A12O3 layer of a thickness of 100 μm was created which was well bonded to the aluminium surface.Various interfaces, A1/α-A12O3, Al/mullite and α-A12O3/;mullite, were studied by conventional transmission electron microscopy (CTEM) and high resolution electron microscope (HREM). It turns out that the presence of the A1/;muilite interface may be essential to form a well bonded oxide layer and the high Si-content α-A12O3 intermediate layer may be wetted better by liquid Al.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable