Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T09:01:17.035Z Has data issue: false hasContentIssue false

Stucture of 1/2<110> Dislocations In γ-Tial by High Resolution Tem and Embedded Atom Method Modelling

Published online by Cambridge University Press:  22 February 2011

J. P. Simmons
Affiliation:
AFOSR/NRC Associate, WL/MLLM, Wright Patterson AFB, OH 45433
M. J. Mills
Affiliation:
The Ohio State University, Department of MS&E, Columbus, OH 43210
S. I. Rao
Affiliation:
UES, Inc., Materials Directorate WL/MLLM, Wright Patterson AFB, OH 45433
Get access

Abstract

High Resolution TEM (HRTEM) observations of a dislocation in γ-TiAl are compared directly with atomistic calculations of dislocation structures performed with atomistic potentials in order to obtain an estimate of the Complex Stacking Fault Energy (γcsf ). A value of between 470 and 620 mJ/M2 was obtained. HRTEM observations are presented of a Ti-52AI sample, containing a dislocation with Burgers vector 1/2<110> and 60° line orientation. This image is matched against images simulated from the outputs of Embedded Atom Method (EAM) simulations, using potentials that were fit to bulk γ-TiAl properties. Two atomistic simulation methods were employed in order to give the range of values for γcsf . In the first of these methods, three EAM potentials were used to simulate the stress-free core structure. These were fit so as to produce three different values of γcsf , all other properties being roughly the same as the literature values for γ-TiAI. All of these potentials produced cores that were more extended than the experimental observation. Thus a value of 470 mJ/M2, being the highest value of γcsf obtainable for the EAM potentials, is reported as a low limit estimate of γcsf for γ-TiAl. An upper limit estimate of the value of γcsf was obtained by applying an external ‘Escaig’ stress that forced the Shockley partials to further constrict, simulating the effect of an increase in γcsf , The preliminary value calculated from this procedure was 620 mJ/M2.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable