Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T14:38:27.773Z Has data issue: false hasContentIssue false

Study of the Effect of Metal/Semiconductor Interface Properties on a Resistance Switching Device

Published online by Cambridge University Press:  01 February 2011

Manuel Villafuerte
Affiliation:
mvillafuerte@herrra.unt.edu.ar, Universidad Nacional de Tucumán,, Física, Lab. de Física del Sólido, Av. Independencia 1800 Tucumán 4000, Argentina
Silvia P. Heluani
Affiliation:
sperez@herrera.unt.edu.ar, Universidad Nacional de Tucumán, Física, Lab. de Física del Sólido, Av. Independencia 1800, Tucumán, 4000, Argentina
Gabriel Juárez
Affiliation:
Gabriel_Juarez@hotmail.com, Universidad Nacional de Tucumán, Física, Lab. de Física del Sólido, Av. Independencia 1800, Tucumán, 4000, Argentina
David Comedi
Affiliation:
dcomedi@herrera.unt.edu.ar, Universidad Nacional de Tucumán,, Física, Lab. de Física del Sólido, Av. Independencia 1800, Tucumán, 4000, Argentina
Gabriel Braunstein
Affiliation:
gbraunst@mail.ucf.edu, Micron Technology, 9600 Godwin Drive, Manassas, VA, 20110, United States
Federico Golmar
Affiliation:
fgolmar@gmail.com, Universidad de Buenos Aires, Lab. de Ablación Láser, Buenos Aires, 1000, Argentina
Get access

Abstract

N-doped ZnO thin films were deposited by pulsed laser deposition on SiO2/Si substrates. X-ray diffraction analysis revealed that the films had the wurtzite structure, and were highly oriented along the c-axis direction. Au and Al electrical contacts were deposited by sputtering on the top surface of the samples, forming a two-terminal structure in each case. The current-voltage characteristics of the two terminal structure, and the temperature dependence of the resistance switching effect, were studied in the 125-300 K temperature range. The results of these measurements are presented and discussed in terms of the different Schottky barrier heights, as well as in terms of interfacial defect-induced gap states.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable