Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-19T02:17:52.127Z Has data issue: false hasContentIssue false

Surface Flatness and Interface Stability of Ni-P Film using New Electroless Plating Method with the Emulsion of Supercritical CO2

Published online by Cambridge University Press:  26 February 2011

Hiroki Uchiyama
Affiliation:
uchiyama.h.aa@m.titech.ac.jp, Tokyo Institute of Technology, Precision and Intelligence Laboratory, Nagatsuda 4259-R2-35, Midoriku, Yokohama, Kanagawa, Yokohama, 226-8503, Japan, +81-45-924-5043
Masato Sone
Affiliation:
sone.m.aa@m.titech.ac.jp, Tokyo Institute of Technology, Precision and Intelligence Laboratory, 4259 Nagatsuda, Midori-ku, Yokohama, 226-8503, Japan
Chiemi Ishiyama
Affiliation:
ishiyama.c.aa@m.titech.ac.jp, Tokyo Institute of Technology, Precision and Intelligence Laboratory, 4259 Nagatsuda, Midori-ku, Yokohama, 226-8503, Japan
Yakichi Higo
Affiliation:
yhigo@pi.titech.ac.jp, Tokyo Institute of Technology, Precision and Intelligence Laboratory, 4259 Nagatsuda, Midori-ku, Yokohama, 226-8503, Japan
Get access

Abstract

This paper proposes a novel coating method combining supercritical fluid technology and electroless plating in a hybrid technique. The electroless plating reactions are carried out in an emulsion of supercritical carbon dioxide (sc-CO2) and an electroless plating solution with surfactants. The Ni-P film obtained by this proposed technique was a uniform and conformal film without the pinholes and nodules. The Ni-P film fabricated by our technique was smoother and more uniform than the substrate after pretreatment and the conventional electroless plating.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable