Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T08:39:46.519Z Has data issue: false hasContentIssue false

The Surface Modification with Fluorocarbon Thin Films for the Prevention of Stiction in Mems

Published online by Cambridge University Press:  10 February 2011

Sang-Ho Lee
Affiliation:
Dept of Metallurgy and Materials Engineering, Hanyang University, Ansan, 425–791, Korea
Myong-Jong Kwon
Affiliation:
Dept of Metallurgy and Materials Engineering, Hanyang University, Ansan, 425–791, Korea
Jin-Goo Park
Affiliation:
Dept of Metallurgy and Materials Engineering, Hanyang University, Ansan, 425–791, Korea
Yong-Kweon Kim
Affiliation:
School of Electrical Engineering, Seoul National University, Seoul, 151-742, Korea
Hyung-Jae Shin
Affiliation:
Core Technology Research Center, Samsung Electronics Co. Ltd., Suwon, 442–742, Korea
Get access

Abstract

Highly hydrophobic fluorocarbon films were prepared by the vapor phase (VP) deposition method in a vacuum chamber using both liquid (3M's FC40, FC722) and solid sources (perfluorodecanoic acid (CF3(CF2)8COOH), perfluorododecane (C12F26)) on Al, Si and oxide coated wafers. The highest static contact angles of water were measured on films deposited on aluminum substrate. But relatively lower contact angles were obtained on the films on Si and oxide wafers. The advancing and receding contact angle analysis using a captive drop method showed a large contact angle hysteresis (ΔH) on the VP deposited fluorocarbon films. AFM study showed poor film coverage on the surface with large hysteresis. FTIR-ATR analysis positively revealed the stretching band of CF2 groups on the VP deposited substrates. The thermal stability of films was measured at 150°C in air and nitrogen atmospheres as a function of time. The rapid decrease of contact angles was observed on VP deposited FC and PFDA films in air. However, no decrease of contact angle on them was observed in N2.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable