Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T05:53:17.408Z Has data issue: false hasContentIssue false

Synthesis And Characterization Of Fluorinated Poly(Arylethers): Organic Polymers For Ic Imd

Published online by Cambridge University Press:  15 February 2011

Neil H. Hendricks
Affiliation:
AlliedSignal Advanced Microelectronic Materials, 3500 Garrett Drive, Santa Clara, CA 95054
Kreisler S. Y. Lau
Affiliation:
AlliedSignal Advanced Microelectronic Materials, 3500 Garrett Drive, Santa Clara, CA 95054
Aaron R. Smith
Affiliation:
AlliedSignal Advanced Microelectronic Materials, 3500 Garrett Drive, Santa Clara, CA 95054
W. Brad Wan
Affiliation:
AlliedSignal Advanced Microelectronic Materials, 3500 Garrett Drive, Santa Clara, CA 95054
Get access

Abstract

Among the more promising approaches to minimizing capacitance in the multilevel interconnect of integrated circuits containing sub-half micron metal spacings is the development of organic polymers which exhibit high performance in key attributes such as thermal stability, low dielectric constant, and low moisture absorption coupled with high outgassing rates of what little moisture may be present. The use of such polymers as the intermetal dielectric can reduce power consumption and cross talk, while increasing signal propagation speed. While polyimides are the most extensively characterized polymer thin film dielectrics, and are in many cases suitable for the intermetal dielectrics in multichip modules, their tendency to absorb significant quantities of moisture, coupled with relatively slow outgas characteristics (presumably due to hydrogen bonding between water molecules and the carbonyls of the polyimide) constitute significant impediments to throughput in the fabrication of IC interconnects.

The search for alternative polymers which incorporate the “good” characteristics of polyimides while exhibiting improvements in electrical, moisture, and processing characteristics led us to the development of nominally 1 μm spin-on films derived from a family of noncarbonyl containing aromatic polyethers. Fluorinated poly(arylethers) based on decafluorobiphenyl exhibit thermal stability comparable to polyimides, from ten to forty times lower moisture absorption, dielectric constants in the mid-two's, and good retention of storage modulus above their glass transition temperatures. The precursor spin-on solutions, formulated in low toxicity organic solvents, exhibit excellent shelf life, and can be prepared with extremely low levels of metallic contamination. This paper describes the synthesis and both solution and film properties of this newly developed class of highly processible thermally stable polymers, first reported by Mercer, et. al. [1]. The characteristics of the polymers when spin-coated on silicon wafers is emphasized. Thermal and thermomechanical properties of nominally 10-25 μm free standing films are also described.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable