Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T15:22:19.628Z Has data issue: false hasContentIssue false

Temperature Dependent Amorphization of Silicon During Self-Implantation1

Published online by Cambridge University Press:  26 February 2011

W.P. Maszara
Affiliation:
Materials Engineering Dept., North Carolina State Univ., Raleigh NC 27695
G.A. Rozgonyi
Affiliation:
Materials Engineering Dept., North Carolina State Univ., Raleigh NC 27695
L. Simpson
Affiliation:
Dept. of Electrical and Computer Engineering, NCSU, Raleigh NC 27695
J.J. Wortman
Affiliation:
Dept. of Electrical and Computer Engineering, NCSU, Raleigh NC 27695
Get access

Abstract

We have investigated the damage which results from silicon self-implantation for the range of doses from 2E14 to 1E16 cm−2 for temperatures from 82 to 296 K for 150 and 300 keV implants. Cross-sectional TEM was used to evaluate the nature of the amorphous layer. The experimental results were correlated with computer calculated damage distributions using a Monte Carlo simulation program. The depth of amorphous-crystalline interface(s) was evaluated as a function of dose and temperature. An experimental damage energy density curve was constructed. Using the curve, a critical energy density for amorphization, Ec was calculated for the samples implanted at different temperatures. The energy was found to depend on depth and implant energy, and it increased with temperature. A study of a-c interface morphology shows no dependance on temperature within the range considered. Kinetics of dynamic annealing are discussed in conjunction with the above findings.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable