Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T14:19:11.024Z Has data issue: false hasContentIssue false

Thermal Effects in Plasma Treatment of Patterned PDMS for Bonding Stacked Channels

Published online by Cambridge University Press:  01 February 2011

Jin Zou
Affiliation:
Thermal Analysis of Material Processing Laboratory, Mechanical Engineering Department, Tufts University, Medford, MA 02155.
Peter Y. Wong
Affiliation:
Thermal Analysis of Material Processing Laboratory, Mechanical Engineering Department, Tufts University, Medford, MA 02155.
Get access

Abstract

This paper presents the results of a study to identify the effects of preheating for plasma oxidation (ashing) of patterned Polydimethylsiloxane (PDMS) for Bio-MEMS applications. PDMS creates an irreversible seal to itself as well as strong seals with glass, silicon, and silicon nitride. This process activates the surface by producing hydroxyl groups that last for several minutes to allow bonding. Several channels can be stacked to create 3D systems for microfluidic applications using PDMS alone or in combination with other materials to develop hybrid systems. For PDMS, bonding temperatures typically occur at room temperature. This research investigates the effect of preheating the materials prior to ashing. The investigators successfully demonstrate good bonding of PDMS to slides with a work adhesion on the order of 100 mJm-2. Preheating the samples at 65°C results in significant increase in work adhesion depending on mixture. The effects of processing temperature and chemical components on bond quality and work of adhesion are reported.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable