Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-15T08:18:44.089Z Has data issue: false hasContentIssue false

Thermodynamic Considerations in Thin-Film Metallizations

Published online by Cambridge University Press:  22 February 2011

Robert Beyers*
Affiliation:
Department of Materials Science and Engineering, Stanford University Stanford, California 94305
Get access

Abstract

The drive to produce smaller devices in integrated circuits is wellknown. Concurrent with this drive is the need to incorporate new materials, such as silicides, as interconnects, diffusion barriers, and contacts. During circuit fabrication, these materials are in contact with other solids and gases at elevated temperatures. Consequently, reactions may occur which degrade the materials present. Since the reactions of interest typically involve three elements distributed in several phases, ternary phase diagrams are required to predict the occurrence of a reaction and the subsequent reaction products, or, conversely, the stability of the phases present. Hence, ternary diagrams can provide important guidance in the selection of optimal materials and the design of reliable processing schedules.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable