Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T13:58:53.853Z Has data issue: false hasContentIssue false

Thermodynamic Simulation and Experimental Study of Irradiated Reactor Graphite Waste Processing with REE Oxides

Published online by Cambridge University Press:  01 February 2011

Olga K. Karlina
Affiliation:
Moscow SIA “Radon”, 2/14, 7-th Rostovsky per., Moscow, 119121, Russian Federation
Vsevolod L. Klimov
Affiliation:
Moscow SIA “Radon”, 2/14, 7-th Rostovsky per., Moscow, 119121, Russian Federation
Galina Yu. Pavlova
Affiliation:
Moscow SIA “Radon”, 2/14, 7-th Rostovsky per., Moscow, 119121, Russian Federation
Michael I. Ojovan
Affiliation:
Immobilisation Science Laboratory, Department of Engineering Materials, University of Sheffield, S1 3JD, UK
Get access

Abstract

Thermochemical processing of reactor graphite waste is based on self-sustaining reaction 4Al + 3TiO2 + 3C = 3TiC + 2Al2O3 which chemically binds 14C from the irradiated graphite in the titanium carbide. Thermochemical processing was investigated to analyse the behaviour of rare earth elements (REE), where REE = Y, La, Ce, Nd, Sm, Eu and Gd. Both thermodynamic simulations and laboratory scale experiments were used. The REEs in the irradiated reactor graphite are formed as activation products of impurities and spread over the graphite bricks surfaces as well as arise from fission of nuclear fuel. REEs can be used also to substitute for waste actinides as well as to increase the durability of carbide-corundum ceramics relative to waste actinides.

Thermodynamic calculations and X-ray diffraction analysis of ceramic specimens synthesized revealed that durable REE's aluminates with perovskite, β-alumina and garnet structures are formed by interaction of REE oxides with the Al2O3 melt during the selfpropagating reaction of ceramic formation.

The porous carbide-corundum ceramics synthesized have a high hydrolytic durability, e.g. the normalised leaching rates of 137Cs, 90Sr and Nd are of the order of 10–7 – 10–8 g/(cm2·day).

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable