Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-19T03:39:56.562Z Has data issue: false hasContentIssue false

Time Resolved Measurements of Interface Dynamics During Pulsed Laser Melting Observed by Transient Conductance

Published online by Cambridge University Press:  15 February 2011

Michael O. Thompson
Affiliation:
Department of Material Science, Cornell University, Ithaca, NY 14853
G. J. Galvin
Affiliation:
Department of Material Science, Cornell University, Ithaca, NY 14853
Get access

Abstract

The transient conductance technique has been used in a detailed study of the liquid-solid interface dynamics during pulsed laser melting of Si and silicon-on-sapphire. Average melt and regrowth velocities, as well as the maximum melt depth, can be obtained with the technique. The measurements are found to agree well with a computer simulation based on a thermal model of the melt and subsequent solidification. The melt-in velocity has been observed to exceed 200 m/sec. Under 2.5 ns UV irradiation, the critical velocity for amorphization of <100> Si has been measured at 15 m/sec.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1983

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable