Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T11:09:28.072Z Has data issue: false hasContentIssue false

Two-step Sintering Process for Lutetium Oxide Transparent Ceramics

Published online by Cambridge University Press:  26 January 2011

Xiaomei Guo*
Affiliation:
Boston Applied Technologies Inc., Woburn, MA
Kewen K. Li
Affiliation:
Boston Applied Technologies Inc., Woburn, MA
Yanyun Wang
Affiliation:
Boston Applied Technologies Inc., Woburn, MA
Yingyin K. Zou
Affiliation:
Boston Applied Technologies Inc., Woburn, MA
Hua Jiang
Affiliation:
Boston Applied Technologies Inc., Woburn, MA
*
*Corresponding Author. Email: xmguo@bostonati.com
Get access

Abstract

During a two-step sintering practice, important factors such as final grain sizes and residual pore status can be controlled through adjusting the first and second step sintering temperatures and durations. Moreover, the sintering temperatures (both the first and the second step) can be several hundred degrees lower than those in a traditional sintering process to obtain fully dense ceramics. Therefore, it is a potentially cost-effective preparation procedure for ceramics with fine grains. In this work, we successfully demonstrated the synthesis of aggregate-free sesquioxide nanometer-sized powders with a narrow size distribution through a modified chemical co-precipitation process. Subsequently, ytterbium-doped Lu2O3 ceramics of near full density were obtained through a two-step sintering process.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable