Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T10:47:57.057Z Has data issue: false hasContentIssue false

Uniformity Control in Elemental Vapor Transport Epitaxy

Published online by Cambridge University Press:  25 February 2011

A. I. Gurary
Affiliation:
EMCORE Corporation, 35 Elizabeth Avenue, Somerset, NJ 08873.
G. S. Tompa
Affiliation:
EMCORE Corporation, 35 Elizabeth Avenue, Somerset, NJ 08873.
R. A. Stall
Affiliation:
EMCORE Corporation, 35 Elizabeth Avenue, Somerset, NJ 08873.
S. Liang
Affiliation:
EMCORE Corporation, 35 Elizabeth Avenue, Somerset, NJ 08873.
Y. Lu
Affiliation:
RUTGERS University, Department of Electrical and Computer Engineering, Piscataway, NJ 08855–0909.
H. C. KUO
Affiliation:
RUTGERS University, Department of Electrical and Computer Engineering, Piscataway, NJ 08855–0909.
Get access

Abstract

Elemental Vapor Transport Epitaxy (EVTE) is a novel technique for semiconductor manufacturing, which combines the advantages of Molecular Beam Epitaxy (MBE) and Vapor Phase Epitaxy (VPE). EVTE provides a high level of elemental flux control, scaling to large deposition areas, and elimination of elemental Ga source related oval defects. EVTE has been successfully applied to the deposition of III-V and II-VI thin films and heterostructures. Design considerations and evaluations of the novel EVTE elements: elemental flux regulating valve operating at temperatures >1250°C with demonstrated response times less than 1 second and elemental flux distribution manifold are presented. The calculated operational parameters for EVTE are in good agreement with the observed experimental results.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable