Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T13:05:57.154Z Has data issue: false hasContentIssue false

Use of Dilute HF With Controlled Oxygen for Post Cu CMP Cleans

Published online by Cambridge University Press:  10 February 2011

K. K. Christenson
Affiliation:
FSI International, 322 Lake Hazeltine Dr., Chaska, MN 55318, kchristenson@fsi-intl.com
C. Pizetti
Affiliation:
Metron Technologies Europe, christian3@compuserve.com
Get access

Abstract

Wet cleaning of wafers during the semiconductor production process often requires uniform removal of a few nanometers of material. Ideally, a single cleaning chemistry can be found that etches all exposed features at a comparable rate. Etch rates near 1 nm/min are desired for batch process and near 10 nm/min for single-wafer processes. A mixture of 500:1 DHF (dilute HF) with dissolved oxygen controlled near parts-per-million (ppm) levels has been found to meet these requirements for post copper CMP (chemical-mechanical polishing) cleans with exposed SiO2 and Cu metal.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable