Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T13:24:16.460Z Has data issue: false hasContentIssue false

Using the Ratio of Loading Slope and Elastic Stiffness to Predict Pile-Up and Constraint Factor During Indentation

Published online by Cambridge University Press:  10 February 2011

J. L. Hay
Affiliation:
Applied Nano Metrics, Inc. P.O. Box 26, Stormville, NY 12582, ,jandj.hay@worldnet.att.net
W. C. Olive
Affiliation:
Nano Instruments,Inc., 1001 Larson Drive, Oak Ridge, TN 37830, nano@nanoinst.com
A. Bolshakov
Affiliation:
Baker Hughes Inteq, P.O. Box 670968, Houston, TX 77267-0968
G. M. Pharr
Affiliation:
Department of Materials Science, Rice University, 6100 Main St., Houston, TX 77005
Get access

Abstract

In recent literature, the ratio of the residual depth of indentation to the total depth, h f /h max , has been shown to be a useful parameter in predicting constraint factor and pile-up during indentation in bulk materials. In this work, h f /h max is shown to have a simple one-to-one relationship to S l /S, or the ratio of the slope of the load vs. displacement curve when loading to the elastic stiffness of the contact. Experimentally, the parameter S l /S is attractive because unlike h f /h max , it can be determined continuously during loading, using only data near the depth of interest. The elastic stiffness, S, is measured using a forced-oscillation technique, thus allowing S l /S to be determined as a function of depth. Previous predictions for constraint factor and pileup are recast in terms of S l /S.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable