Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T10:58:12.140Z Has data issue: false hasContentIssue false

Wear Behavior of Flat and Graded Profile Boron-Implanted Beryllium

Published online by Cambridge University Press:  25 February 2011

K. Kumar
Affiliation:
The Charles Stark Draper Laboratory, Inc., Cambridge, MA 02139
H. Newborn
Affiliation:
The Charles Stark Draper Laboratory, Inc., Cambridge, MA 02139
R. Kant
Affiliation:
Naval Research Laboratory, Washington, D.C. 20375
Get access

Abstract

Pin-on-disk tests were performed for comparative friction and wear behavior on flat and graded profile boron implanted beryllium samples. Peak, intended boron concentrations of 10, 20, 30 and 40 atom percent were investigated. Auger Electron Spectroscopy was used to determine the boron concentration as a function of depth. Preliminary work was performed to study the effects of (1) a low temperature (450°C, 1–1/2 hours) heat treatment of the implanted specimens and (2) a change in the pin material. All of the boron implanted beryllium samples showed significant improvement versus unimplanted beryllium and an anodized beryllium surface. Graded samples showed comparable friction coefficients but inferior wear resistance with respect to the flat profile samples.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable