Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T14:54:23.809Z Has data issue: false hasContentIssue false

X-ray Reflectivity Study of Gold Nanoparticles in a Polymer Matrix

Published online by Cambridge University Press:  17 March 2011

Kwanwoo Shin
Affiliation:
National Institute of Standards and Technology, 100 Bureau Dr. Gaithersburg, MD 20899Dept. of Materials Science and Engineering, Kwanju Institute of Science and Technology, Kwangju, 500-712, Korea
Howard Wang
Affiliation:
National Institute of Standards and Technology, 100 Bureau Dr. Gaithersburg, MD 20899
Sushil K. Satija
Affiliation:
National Institute of Standards and Technology, 100 Bureau Dr. Gaithersburg, MD 20899
Charles C. Han
Affiliation:
National Institute of Standards and Technology, 100 Bureau Dr. Gaithersburg, MD 20899
Daniel Josell
Affiliation:
National Institute of Standards and Technology, 100 Bureau Dr. Gaithersburg, MD 20899
Get access

Abstract

We have examined the structural evolution of a thin gold layer sandwiched between two polymer films using specular X-ray reflectivity. We used a depth-profiling model consisting of three independent layers, upper and bottom PS layers and an intermediate gold layer. The results show that a well-defined as-deposited Au layer of about 62 ± 3 Å breaks within 10 min of annealing at 120 °C. During the breakage of the Au film, the bottom low-Mw PS flows to fill into the void between the Au particles, causing the reduction of the bottom PS film, while the top polymer layer remains relatively constant.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable