Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T12:32:19.964Z Has data issue: false hasContentIssue false

Accelerated sintering of SiC Nanopowder with Stacking Disorder-Order Transformation

Published online by Cambridge University Press:  26 February 2011

Kenshiro Shirai
Affiliation:
t05d003@students.chem.ryukoku.ac.jp, Ryukoku University, Materials Chemistry, Japan
Takeshi A Yamamoto
Affiliation:
yamamoto@project1.hrc.ryukoku.ac.jp, Ryukoku University, High-tech Research Center, Japan
Manshi Ohyanagi
Affiliation:
ohyanagi@rins.ryukoku.ac.jp, Ryukoku University, Materials Chemistry, Japan
Zuhair A Munir
Affiliation:
zamunir@ucdavis.edu, University of California, Davis, Chemical Engineering and Materials Science, United States
Get access

Abstract

Consolidation of SiC nanopowder with stacking disordered structure was accelerated by milling with the AlN as the additive. SiC powders without the additive was sintered at 1900°C to a density of 99%. The grain size of the sintered material was approximately 500 nm. On the other hand, with AlN as additive, the sintering temperature to reach a density of 98% was reduced to 1700°C by the addition of 1.0 mol% AlN. The grain size of this material was less than 100 nm. The effect of AlN addition on SiC sintering with disorder-order transformation was evaluated by shrinkage profile, XRD analysis, and TEM observation.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable