Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T15:14:13.309Z Has data issue: false hasContentIssue false

Active Si Interposer : Combination of Through-Si Vias and Redistribution

Published online by Cambridge University Press:  26 February 2011

Kazumi Hara
Affiliation:
hara.kazumi@exc.epson.co.jp, Seiko Epson corporation, Advanced Technology Development Center, 1010 Fujimi,Fujimi-machi, Suwa-gun, Nagano-ken, 399-0295, Japan, 81-266-62-7534, 81-266-62-4415
Nobuaki Hashimoto
Affiliation:
hashimoto.nobuaki@exc.epson.co.jp, Seiko Epson corporation, Advanced Technology Development Center, SUWA MINAMI Plant 1010 Fujimi,Fujimi-machi,, Suwa-gun, Nagano-ken, 399-0295, Japan
Haruki Ito
Affiliation:
ito.haruki@exc.epson.co.jp, Seiko Epson corporation, Advanced Technology Development Center, SUWA MINAMI Plant 1010 Fujimi,Fujimi-machi,, Suwa-gun, Nagano-ken, 399-0295, Japan
Yoshihiko Yokoyama
Affiliation:
yokoyama.yoshihiko@exc.epson.co.jp, Seiko Epson corporation, Advanced Technology Development Center, SUWA MINAMI Plant 1010 Fujimi,Fujimi-machi,, Suwa-gun, Nagano-ken, 399-0295, Japan
Tsuyoshi Imamura
Affiliation:
imamura.tsuyoshi@exc.epson.co.jp, Seiko Epson corporation, Advanced Technology Development Center, SUWA MINAMI Plant 1010 Fujimi,Fujimi-machi, Suwa-gun, Nagano-ken, 399-0295, Japan
Get access

Abstract

Active Si Interposers (ASI), which are device chips with through Si vias (TSVs) and redistribution wirings, are the focus of this study. A feature of the module is that the redistribution layer includes a stress buffer layer so that stress can be alleviated when it is mounted on a motherboard. For the purpose of this study, it was decided to conduct the process from the backside of the wafer for efficiency of production. One feature of this process is that a device wafer was processed with a glass wafer supported throughout the TSVs' process in order to facilitate process of a thin wafer. However, the maximum temperature of each process was limited. We addressed this problem by the optimization of some of the equipment and the modification of the adhesive that attaches the device wafer to a glass wafer. Finally, a module that was a combination with the ASI and a certain device operated normally. In the last part of this study, the results of the evaluation that studied the impact on the devices of the TSVs' process are presented.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable