Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T23:27:52.309Z Has data issue: false hasContentIssue false

Adhesion Effects on the Recrystallization of SiliconFilms

Published online by Cambridge University Press:  25 February 2011

C. E. Bleil
Affiliation:
Electronics Department, General Motors Research Laboratories, Warren, Michigan 48090-9055
J. R. Troxell
Affiliation:
Electronics Department, General Motors Research Laboratories, Warren, Michigan 48090-9055
Get access

Abstract

Laser processing of thin films of amorphous or polycrystalline silicon oninsulator substrates, such as the glass normally used for liquid crystaldisplays, frequently leads to film thickness variations which areunacceptable for device fabrication. Some thickness variations are caused bythe high surface tension of molten silicon and the poor adhesion of thesilicon to the substrate. Techniques to reduce this problem by increasingthe adhesion of the film to silicon dioxide coated Corning 7059 glasssubstrates have been investigated. Two different approaches were used.First, silicon ions were implanted into the silicon-glass interface toincrease the direct bonding of the silicon to the silicon dioxide. Second,layers of material known to exhibit better adhesion to both silicon andsilicon dioxide were introduced between the silicon film and the glasssubstrate. Both techniques produced films which, after subsequent laserprocessing, showed significantly reduced thickness variations. Theseprocedures make it possible to laser process thin films of silicon onCorning 7059 glass substrates under conditions which produce large grainpolysilicon films without producing unacceptably large thickness variationsor film cracking.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable