Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T16:03:17.831Z Has data issue: false hasContentIssue false

Adsorption-Induced Failure Modes of Thin-Film Resonators

Published online by Cambridge University Press:  21 March 2011

R. Kazinczi
Affiliation:
Delft University of Technology, DIMES Mekelweg 4, 2628 CD Delft, The Netherlands E-mail: r.kazinczi@its.tudelft.nl
J.R. Mollinger
Affiliation:
Delft University of Technology, DIMES Mekelweg 4, 2628 CD Delft, The Netherlands E-mail: r.kazinczi@its.tudelft.nl
A. Bossche
Affiliation:
Delft University of Technology, DIMES Mekelweg 4, 2628 CD Delft, The Netherlands E-mail: r.kazinczi@its.tudelft.nl
Get access

Abstract

The mechanical and resonant properties of thin film resonators are influenced by the surrounding environment. Adsorption- and surface oxidation-induced stiffening effect was observed on silicon nitride and silicon carbide cantilever beams. The resonance frequency increased logarithmically in time upon exposure to ambient air. The variations of surface stress and spring constant of the SiNx cantilever beam were calculated. Further oxynitride formation on the surface increased the stability of the resonators. The shock response of the structures was studied in various environments. The resonance frequency abruptly dropped due to cracking of the absorbed surface layer, than recovered logarithmically. The initial drop and the recovery rate is environment dependant. Humidity increased, while argon and nitrogen rich environments mitigated the degrading effects. The SiCx is more inert to the environmental effects and proved to be a promising candidate as structural material in resonant MEMS devices.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable