Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T02:29:03.701Z Has data issue: false hasContentIssue false

Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

Published online by Cambridge University Press:  02 January 2015

M. Kastenhuber
Affiliation:
Department of Physical Metallurgy and Materials Testing, Montanuniversitaet Leoben, Roseggerstr. 12, A-8700 Leoben, Austria
B. Rashkova
Affiliation:
Department of Physical Metallurgy and Materials Testing, Montanuniversitaet Leoben, Roseggerstr. 12, A-8700 Leoben, Austria
H. Clemens
Affiliation:
Department of Physical Metallurgy and Materials Testing, Montanuniversitaet Leoben, Roseggerstr. 12, A-8700 Leoben, Austria
S. Mayer
Affiliation:
Department of Physical Metallurgy and Materials Testing, Montanuniversitaet Leoben, Roseggerstr. 12, A-8700 Leoben, Austria
Get access

Abstract

Ensuring microstructural stability under technical relevant conditions is a determining criterion for the development of innovative high-temperature materials. In this work, the influ-ence of C and Si on the microstructural stability during creep exposure was investigated for a β-solidifying γ-TiAl based alloy with a nominal composition of Ti-43.5Al-4Nb-1Mo-0.1B (in at.%), named TNM. With a two-step heat treatment a microstructure consisting of fine lamellar α2/γ-colonies, surrounded by βo-phase and areas of discontinuous precipitation, starting from the boundaries of the lamellar colonies, was adjusted. Creep tests were carried out to examine the potential of C and Si to prevent microstructural instability during creep and hence improving the creep properties. At 815 °C the discontinuous precipitation process of the TNM alloy continues during ensuing creep testing leading to a reduced creep resistance. In comparison, the minimum creep rate of the TNM-0.3C-0.3Si alloy was significantly decreased caused by the lower βo-phase content and average lamellar spacing within the α2/γ-colonies, the precipitation of p-Ti3AlC carbides and the retarded kinetics of discontinuous precipitation.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable