Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T11:37:22.164Z Has data issue: false hasContentIssue false

AFM and TEM Examination of Surface Grains in LPCVD Silicon Films

Published online by Cambridge University Press:  17 March 2011

Dave Kharas
Affiliation:
Dept. Materials Science, State University of New York in Stony Brook, Stony Brook, NY 11794-2275
R. J. Gambino
Affiliation:
Dept. Materials Science, State University of New York in Stony Brook, Stony Brook, NY 11794-2275
N. Golubovic-Liakopoulos
Affiliation:
Standard MEMS Inc. Hauppauge, NY 11788
Get access

Abstract

Polycrystalline silicon is an important technological material in microelectronics, and more recently in microelectromechanical systems (MEMS). For MEMS applications polysilicon films with residual tensile stress are often used, requiring film growth in the transition zone from 550-600°C. In this study polysilicon films were grown in a hot walled LPCVD reactor at 590°C to a thickness of 450 nm. The tensile as-deposited stress in the wafers was found to decrease with distance from the reactor front and served as a marker for the changing microstructure and surface roughness of the film as measured by Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM). It was found that the surface contained a high density (≍30 /µm2) of grains that protruded 30 nm above the mean film surface. The size and volume of these grains increased linearly with decreasing stress until the surface saturated and became uniformly rough. The nature of these surface grains, their spatial characteristics, and their annealing behavior is discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable