Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T05:40:15.871Z Has data issue: false hasContentIssue false

Aluminum Alloy Formation and Impacts in Advanced Replacement Metal Gate Process

Published online by Cambridge University Press:  31 January 2012

K. Xu
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
Y. Wang
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
S.H. Shen
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
X. Xia
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
W.Ch. Tu
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
L. Karuppiah
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
H. Yang
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
Z. Ge
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
Y. Lei
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
M. Allen
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
N. Yoshida
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
L.W. Chang
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
B. Liu
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
M. Okazaki
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
A. Brand
Affiliation:
Applied Materials, 974E. Arques Ave. Sunnyvale, CA 94085, U.S.A. E-mail: kun_xu@amat.com
Get access

Abstract

For the gate last approach of a high K metal gate scheme used in advanced CMOS technology, various materials were tested as wetting layers to allow Aluminum (Al) gap fill at gate widths of10 to 45 nanometers. In this study, Titanium (Ti) and Cobalt (Co) were investigated as a wetting layer for Al gap fill. It was discovered that Al-Ti and Al-Co alloys were formed during high temperature Al deposition. Alloys were characterized using XRD. Alloy’s impacts on line resistivity and subsequent Al Chemical Mechanical Polish (Al CMP) were also investigated. In addition, a model was established to predict the alloy type and alloy mole% with respect to feature size. The predicted Al mole% by this model correlated very well with 1) line resistivity trend and 2) morphologies. The model also predicted that due to Al lower electro-chemical potential than Ti, Co or its alloys, galvanic corrosion could take place depending on the chemical environment in the Al CMP slurry. Different slurry or cleaning chemical may reduce or increase the risk of galvanic corrosion. The knowledge gained with the help of the model provides clear directions on selection criteria for wetting layers, optimization for deposition processes and Al CMP consumable design to meet the challenges.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable