Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T10:37:37.781Z Has data issue: false hasContentIssue false

An Advanced Cold Process Canister Design for Nuclear Waste Disposal

Published online by Cambridge University Press:  28 February 2011

Heikki Raiko
Affiliation:
Technical Research Centre of Finland, Nuclear Engineering Laboratory, Lonnrotinkatu 37, SF-00180 Helsinki, Finland
Jukka-Pekka Salo
Affiliation:
Teollisuuden Voima Oy (TVO), Nuclear Waste Office, Fredrikinkatu 51–53 B, SF-00100 Helsinki, Finland
Get access

Abstract

An advanced cold process canister design, ACPC-design, is introduced in this paper. The cold process canister consists of a steel canister as a load bearing element, with an outer corrosion shield of copper, Fig. 1 - Fig. 4. The canister will be rilled with granular material, such as lead shots, glass beads or quartz sand.

The conditions for the canister design are presented: dimensioning against radiation, allowed heat loads, strains, corrosion and leak tightness etc. The mechanical dimensioning of the copper/steel canister is made according to the Finnish standards (SFS) for pressure vessels.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable