Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T16:32:23.747Z Has data issue: false hasContentIssue false

An Analysis of Surface Temperature Rise at Small Scale Sliding Contacts

Published online by Cambridge University Press:  01 February 2011

Sudipto Ray
Affiliation:
sudipto@mech.iitkgp.ernet.in, INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR, MECHANICAL, TRIBOLOGY LAB, KHARAGPUR, WEST BENGAL, 723102, India, 919434368928
S. K. Roy Chowdhury
Affiliation:
skrc@mech.iitkgp.ernet.in, INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR, DEPARTMENT OF MECHANICAL ENGINEERING, India
Get access

Abstract

A great deal of work has been carried out in recent years on temperature rise at the contact between sliding bodies with engineering scale roughness. However, as surfaces become smoother and loading decreases, in applications such as MEMS and NEMS devices, the analysis of surface temperature rise must consider the small-scale asperity height distributions and the surface forces that may be operating at small separations. The paper attempts to predict surface temperature rise at sliding contacts with small-scale roughness considering the influence of relevant parameters. The important observation here is that in addition to the dependence on load, speed and material parameters the contact temperature steadily increases with surface adhesion.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable